Premium quality 24ft-25ft (7.3m-7.6m) "Styled to fit" Jumbo Boat Cover
This Kaiser Boating Jumbo Boat cover is made from 8.1 oz/600d/ 600 denier marine grade polyester. 600d is an indirect measurement of density and weight. The higher the number, the heavier, thicker, and heavier duty. This is the thickest cover you will find. You will see a lot of 300d, even 150d covers, which are proportionally half as thick and 1/4 as thick as our covers. The fabric we use is coated twice with polyurethane on the bottom or downside, UV protected, and mildew protected. What this all adds up to is the best cover available.
New Design with Zipper on two sides
Find the right cover for your boat
The material of this cover is heavy duty enough to support any reasonably paced trailering. This particular unit is "Styled to fit" boat with T-Top or Rocket Launcher up to 1500mm height from gunwale that is between 24 and 25 ft long, with a maximum beam of 104" (2.64m). This is not a disposable type cover. It is made for years and years of use.
How to Measure Length for Boat
1. Measure the length using a straight measurement from bow to stern (including bow rail).
2. Measure the beam width across the widest point of the boat using a straight measurement.
This boat cover comes with 12 months warranty
Even though this cover is made for years and years of use, the estimated colour fastness is about 1 - 1 1/2 year depends on weather conditions including high UV conditions, high humidity, high rainfall, cyclones etc and how you use the cover e.g. do you leave it on the boat exposed to the sun all the time? The warranty does not cover normal wear, weather soiling, stains from environmental pollution and/or standing water, cuts from sharp objects, neglect, accident or misuse.
|Size:||24-25ft (7.3-7.6m) with 104" (2.64m) Beam|
|Model:||24-25' Jumbo Boat Cover|
|Fabric:||8.1oz 600D Oxford|
|Fits:||Boat with T-Top or Rocket Launcher up to 1500mm height from gunwale|